What Do I Need To Know Before Drilling A Well?

What do I need to know about drilling a water well?

The depth of the groundwater supply may dictate how, and if, you can drive or drill your well.

For good potable water, you will have to go deep enough.

Acceptable water will usually require going at least 30 feet down, but better water will usually be even deeper.

Never drive or drill a well in a marshy, wet area..

How far down do you have to drill for a well?

Most household water wells range from 100 to 800 feet deep, but a few are over 1,000 feet deep. Well yields can be increased by fracturing the bedrock immediately around the drill hole and intercepted rock faults.

What maintenance is required for a well?

Keep hazardous chemicals, such as paint, fertilizer, pesticides and motor oil away from your well. Periodically check the well cover or well cap on top of the casing (well) to ensure it is in good repair. Always maintain proper separation between your well and buildings, waste systems, or chemical storage facilities.

What are the signs of a well going dry?

If you get your water from a private well, there are some warning signs that your well may be going dry. The first sign is the water is sputtering out of the tap, indicating air pockets in the well. The second sign is the water is not clear, but muddy or filled with sediment.

Do Wells need maintenance?

Regular maintenance of your well is required to ensure the continued safety of your water and to monitor for the presence of any contaminants. … All hazardous materials, such as paint, fertilizer, pesticides, and motor oil, should be kept far away from your well.

Does a deeper wells mean better water?

Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.

Can you drill an existing well deeper?

Drilling machines can drill to great depths. Deeper wells usually cost more than a shallow well to construct in the short-run. However, not drilling deep enough can result in later problems that will be much more expensive to fix.

Can you drill a well anywhere?

You probably can drill your own well on your property. You, of course, would have to contact your local building department to see if there are any regulations that must be followed. Some states and cities may still charge you for the water that’s pulled from your land, but that’s a debate for another day.

Is digging a well worth it?

Even if the well can’t provide all of your water needs, it might be worth digging if you can offset some of your water usage from your city’s supply.

How many years does a water well last?

30-50 yearsThe average lifespan of a well is 30-50 years, although they can last longer or shorter depending on different circumstances. If the well you are buying is over 20 years old, you should at least factor in replacing the parts that commonly fail into your home buying budget.

How Far Should a well be from the house?

The state’s horizontal separation distance (setback) mandates a minimum of 100 feet. However, if you have a well that serves a single family dwelling and due to lot restrictions, you cannot achieve 100 feet, the setback may be reduced to a minimum of 50 feet.

How do you tell if you need a new well?

We’ve identified some of the most common signs that a residential well is having issues or that there could be a contamination concern.Your Faucets are Sputtering. … Your Electricity Bill is High. … You Hear Strange Sounds. … Something Looks, Smells, or Tastes Strange. … Poorly Installed or Damaged Well Caps.More items…•