Quick Answer: Can You Drink From A Shallow Well?

How do you treat shallow well water?

Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlo- rine).

Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems..

How do I know if my well is deep or shallow?

If it is small diameter, such as 1-1/4” PVC, that would indicate it is a shallow “well point” as they are called. If it is 2″ or above, it very well could be a deep well. Larger casings may also be shallow wells. Some of the largest diameter wells are very shallow (bored wells).

Does well water replenish itself?

While your well is a 6” hole in the ground, it is not directly replenished by rainfall, as you might expect a cistern to function. … With less rain, or changes in aquifer structure, the well becomes non-water bearing – i.e. dry. Your well may not ‘fill up’ when it rains, but it does reap the indirect benefits.

How Far Should a well be from a house?

10 feetWells in most jurisdictions are at least 10 feet from the property line. That would mean that your well and your neighbour’s well would be at least 20 feet apart. That distance might not prevent your neighbor’s well from tapping right into your well’s aquifer and water supply and thus reducing your well’s flow rate.

Can you drink water from a sand point well?

Installed properly using a high quality drive-point, it can provide an adequate supply of safe drinking water, especially for cottages and many residences.

How do I find the water table in my area?

How to Find My Water TableCall your local County Extension Office. It may have statistics for the average annual water table level in your area. … Look online. Check out the website for your local Water Resources Office. … Dig. This is the most reliable way to find the water table level on your land.

How shallow can a well be?

Types of wells Dug wells have a large diameter, are shallow (approximately 10 to 30 feet deep) and are not cased continuously. Driven wells are constructed by driving pipe into the ground. Driven wells are cased continuously and shallow (approximately 30 to 50 feet deep).

Does a deeper wells mean better water?

Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.

What is shallow well and deep well?

Shallow or unconfined wells are completed in the uppermost saturated aquifer at that location (the upper unconfined aquifer). Deep or confined wells are sunk through an impermeable stratum into an aquifer that is sandwiched between two impermeable strata (aquitards or aquicludes).

What are the symptoms of contaminated well water?

Symptoms include diarrhea, vomiting, cramps, nausea, headaches, fever, fatigue, and even death sometimes. Infants, children, elderly people, and people with weakened immune systems are more likely to get sick or die from disease-causing microorganisms in drinking water.

Can I pour hydrogen peroxide in my well?

From time to time, it may be desirable to use hydrogen peroxide to decontaminate the entire well because some of the odor-causing bacteria also produce sulfuric acid, which will corrode the pump in the long run. Some of the iron bacteria can also produce a musty, fishy or oily smell in the water.

How do I know what my water table is?

The most reliable method of obtaining the depth to the water table at any given time is to measure the water level in a shallow well with a tape. If no wells are available, surface geophysical methods can sometimes be used, depending on surface accessibility for placing electric or acoustic probes.

Is it safe to drink water from a shallow well?

Water doesn’t have to filter through very many feet of soil before it is clean and safe. As long as the wellhead and neighbors wellheads are sealed and there are no other places where rain or run off can directly enter the well, shallow wells are still fairly safe.

How deep does a well have to be for drinking water?

between 10 and 30 feetDug wells are the shallowest type of well, typically between 10 and 30 feet deep; therefore, the most likely to become contaminated from nearby agricultural, industrial, or urban sites. Driven wells are hammered into the ground and draw water from the saturated zone.

How much does a shallow well cost?

Cost To Dig A Shallow Well. The average cost to dig a shallow well is between $1,800 and $3,000, or $5 to $10 per cubic yard depending on the depth of the water table. Shallow wells are typically 25′ to 50′ deep, 3 to 10 feet in diameter, and are best in areas without rocks or any bedrock.

Can you drill an existing well deeper?

Well Deepening: Reentering an existing well and drilling to a deeper reservoir. Well deepening is re-drilling into an already existing well in order to find a deeper more productive reservoir. Sometimes a previously unproductive well can be deepened in order to reach a location with higher flow and temperature.

How can you tell when you hit water when drilling a well?

How do you know when you hit water? We have a huge air compressor on the rig that blows air down the drill stem. The air comes back up the hole with enough force to move all cuttings up and out of the hole. If the well is producing water, the water will come too.

How long will a shallow well last?

Submersible pumps that are commonly used in many wells usually last from eight years to ten years. With proper maintenance and care, the lifespan can be increased to fifteen years. After ten years, if your water well is not working correctly, it needs to be replaced.

How can I naturally purify my well water?

The following are the common methods of water purification.Boiling. This is a reliable way to purify water. … Use of Iodine solution, tablets or crystals. This is an effective and more convenient method. … Use chlorine drops. Chlorine has the ability to kill bacteria in water. … Use water filter. … Use Ultraviolet Light.

What is a good well depth?

The Range. In general, private home wells tend to range from 100 to 500 feet in depth. … There are even some wells that go past the 1,000 foot mark. The average well depth in your area will depend on several factors.