Question: How Much Can A Bobcat T300 Lift?

How much can a Bobcat lift?

Powerful, vertical-path lift arms deliver straight-up strength — an impressive 2,500-pound rated operating capacity.

With that kind of muscle, you can easily handle big loads.

And the S250’s reach of 34 inches and lift height of 10.5 feet make loading trucks fast and effortless..

How many horsepower is a Bobcat t650?

BOBCAT T650 SpecsMakeBobcatHydraulic HP High Flow62.3 HPEngine HP74 HPWidth72.9 in.Lift Capacity at 35%2570 lb.9 more rows

How deep can you dig with a bobcat?

Both the 35PH and 50PH planetary augers are 11.5 inches wide and 39.6 inches long and can dig to depths of 73 inches without an extension. An optional adjustable inner extension is available to increase the digging depth an additional 48 inches.

How many hours should a bobcat last?

Re: How many hours should a BobCat last? By 8000 hours they are getting pretty sloppy. It all depends on maintenance. In well kept conditions the engine is probably good for 10,000 hours.

How much does a t300 Bobcat weight?

9702 lb.BOBCAT T300 SpecsMakeBobcatWidth78 in.Lift Capacity at 35%3000 lb.Lift Capacity at 50%4604 lb.Operating Weight9702 lb.9 more rows

Is a Bobcat 863 a good machine?

In my opinion, the 863 dug better than any machine I had except the s220 which had a tad more power. … the machine’s lift arms are adequate and I think by 2003 Bobcat was gussetting the arms where earlier models had cracks. If not, the upgrade is real simple and it helps. Good luck.

What skid steer can lift the most?

Cummins Powers World’s Strongest Skid-Steer. Vertical-lift linkage on Gehl’s 7810E skid-steer provides consistent forward reach throughout the lift cycle and more dump reach (38.2 inches) at maximum height than any other skid-steer.

How much weight can a 773 Bobcat lift?

With an extended, smooth-riding wheelbase, a vertical lift path and 7 mph travel speed, the Bobcat® 773 skid-steer loader is an ideal machine for your lift-and-carry chores. Rated Operating Capacity: 1750 lbs. (794 kg.) ROC with Optional Counterweight: 1850 lbs.

What does lift capacity at 50 mean?

Rated operating capacity (ROC) is a stability measurement by which skid-steer loaders are rated and compared. ROC is calculated as 50% of the machine’s tipping load. The tipping load is the amount of weight that would lift the rear tires when applied to the bucket at the machine’s maximum reach-point in the lift cycle.

How much fuel does a bobcat hold?

The Bobcat T590 has a fuel tank capacity of 93.7 litres.

How many gallons per hour does a skid steer use?

1-1.5 Galfigure a small skid steer at about 1-1.5 Gal/hour, larger ones can easily get to the 3GPH range if you are using a high HP attachment.

How much can a Bobcat 873 lift?

The 873 offers 2300 lbs. of lift (rated operating capacity) muscle to easily handle those big loads like pallets of sod or brick. Loading trucks is easy with its vertical lift path design and nearly 38 in. of reach at maximum lift height of almost 10.5 feet.

How much can a Bobcat 863 lift?

The new 863 offers 1,900 lbs of lift (rated operating capacity) along with its more powerful tractive effort and hydraulic breakout force.

How much does a 863 Bobcat weigh?

7135 poundsBobcat 863 Skid Steer Loader It has a Diesel Engine that produces 73 horsepower. It is a four cylinder and weighs 7135 pounds.

Can a bobcat kill a deer?

However, the cats are also extremely adept at killing adult white-tailed deer. Although they generally hunt fawns, they have been known to kill adults, which can weigh 250 pounds or more. To slay such a large herbivore, a bobcat will jump onto its back and bite through the throat.

What is considered high hours on a skid steer?

I’ve found that on average anything above 2,000 hours, in a skid steer, is pushing high hours. There will be exceptions to this rule, I’ve seen nice skid steers with 3,500 hours on them and I’ve seen junk skid swith 1,200 hours on them. I’d say 2,000-2,500 hours is typically a worn out skid steer.

Is 5000 hours a lot for a bobcat?

It all depends on maintenance. I can get ours to 5000 hours without much trouble at all and then little things seem to start popping up. But I’ve seen 5000 hour machines that look like 10,000 hour machines. Hour meters get replaced occasionally too, so you really need to look at condition over hours.

Is 4000 hours a lot for a skid steer?

This may indicate that it’s due for costly replacement parts, maintenance, or other repairs. An older machine with low hours may be a better investment. For comparison, 5 to 6 hours a day is considered full-time use. … So a skid steer that’s 10 years old but has less than 4,000 hours on it could be a solid machine.