How Do You Sanitize A Deep Well?

How long does it take for water to clear after shocking a well?

Run the water to flush the bleach solution out of the well.

Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well.

Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution..

How do you kill iron bacteria?

Treatment to Kill Iron Bacteria Once introduced into a well, iron bacteria are difficult if not impossible to fully eradicate. Chlorination is the most practical method to kill or control iron bacteria. A well can be disinfected and iron bacteria killed by adding chlorine.

How long should you wait to drink water after you chlorinate a well?

Use your reserves of fresh water for all purposes. Step 6 WAIT at least 12 hours before turning faucets back on. Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it.

Will shocking a well get rid of iron bacteria?

Techniques to remove or reduce iron bacteria include physical removal, pasteurization (injecting steam or hot water into the well and maintaining a water temperature of 140°F/60°C for 30 minutes), and chemical treatment—most commonly well disinfection with chlorine, including shock (super) chlorination.

How do you kill bacteria in your well?

Page 1Chlorination is the process of treating (disinfecting) a well and plumbing system with chlorine to kill or reduce certain kinds of bacteria. … Full Chlorination.The Full Chlorination method kills bacteria that may be present in wells, plumbing systems and in the aquifer surrounding the well.More items…

How much bleach do you use to disinfect a well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

Why does my water turn brown when I put bleach in it?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

Why does my well water smell like rotten eggs?

Hydrogen sulfide gas (H2S) can give water a “rotten egg” taste or odor. This gas can occur in wells anywhere and be: Naturally occurring – a result of decay and chemical reactions with soil and rocks. Produced by certain “sulfur bacteria” in the groundwater, well, or plumbing system.

Will vinegar kill iron bacteria?

Chlorination disinfects your well by destroying unhealthy bacteria and microorganisms and removing dissolved iron, manganese, and hydrogen sulfide. It can be managed easily at home with common household bleach and food grade white vinegar.

Does hydrogen peroxide kill iron bacteria?

Benefits of Hydrogen Peroxide Water Treatment Kills iron bacteria and prevents bacterial slime from building. There’s no trace of chemical residues because peroxide decomposes fully into water. Because hydrogen peroxide integrates into water immediately, it’s also biodegradable.

How many years does a water well last?

30-50 yearsThe average lifespan of a well is 30-50 years, although they can last longer or shorter depending on different circumstances. If the well you are buying is over 20 years old, you should at least factor in replacing the parts that commonly fail into your home buying budget.

How long does it take to smell bleach when shocking a well?

It can take 30 minutes to 24 hours or more to flush all of the chlorine from the well. ►Once the chlorine is gone from the well, open up each fixture one at a time until the chlorine smell is no longer present.

Will Shocking well get rid of sulfur smell?

1. Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months. 2.

Can I pour bleach down my well?

Chlorinate the well. Ⅰ Use household bleach which typically has a chlorine concentration of 6%. … Ⅰ Mix bleach in a bucket of water. Remove well cap, plug, or vent (see diagrams on page 2); using a funnel, pour the bleach into your well.

Can iron bacteria make you sick?

Iron bacteria are not known to cause disease. However, they can create conditions where other disease-causing organisms may grow. They can also affect how much water the well produces and may cause clogging issues. To be safe, test the water for nitrate and coliform bacteria.

Does bleach kill iron bacteria?

Sodium hypochlorite, the chlorine chemical found in bleach, when used as disinfectant, is more than 99% effective within a pH range of 5 to 7 at killing bacteria. … Well owner shock chlorination treatment will do little or nothing to control or prevent the growth of biomass, and iron- and sulfur-reducing bacteria.

How often should you chlorinate your well?

Have a professional check your well water every three to five years to ensure it’s free of dangerous microbes. If their tests do reveal the presence of microbes, order a complete well chlorination. Chlorine treatment will remove all toxic bacteria and algae, with only minimal disruption to your water supply.

Can I pour hydrogen peroxide down my well?

From time to time, it may be desirable to use hydrogen peroxide to decontaminate the entire well because some of the odor-causing bacteria also produce sulfuric acid, which will corrode the pump in the long run. Some of the iron bacteria can also produce a musty, fishy or oily smell in the water.

Does hydrogen peroxide kill bacteria in water?

Hydrogen peroxide does kill germs, including most viruses and bacteria. A concentration of 3% hydrogen peroxide is an effective disinfectant typically found in stores. Hydrogen peroxide can damage some surfaces, and is a more dangerous chemical than some disinfectants, so be cautious when handling it.

Can you drink water with hydrogen peroxide?

However, there’s no scientific evidence that drinking it yields any benefits. Plus, doing so is linked to dangerous side effects, including breathing problems, severe gut damage, and in some cases, death. For these reasons, drinking any concentration or amount of hydrogen peroxide is not recommended.

How long after bleaching Well can I shower?

24 hoursBefore you chlorinate your well, there are a number of precautions and steps to take to ensure safety for your family. Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea.